The Right Application is Key -  Tel: +27 11 472 0670

CONTACT US

PE 1000

Ultra High Molecular Weight Polyethylene UHMWPE

PE 500

High Molecular Weight Polyethylene - Molecular weight +/- 500,000 g/mol

Oil Filled Nylon is an internally lubricated oil filled cast nylon 6 which is self-lubricating in the real meaning of the word. This highly modified caprolactum grade has internal liquid lubricant evenly distributed throughout the polymeric mix and is a distinctive green colour.

Oil Filled Nylon is specifically developed for unlubricated moving parts applications and yields a considerable growth in the application possibilities of nylon sheet, rod and tube. This is because of its reduced coefficient of friction (-50%) and improved wear resistance (up to 10X).

 

FEATURES

APPLICATIONS

• Excellent sliding properties

 

• Extremely high abrasion resistance

 

• High mechanical strength coupled with high impact
   strength

 

• Excellent machinability

 

• Mechanical engineering: e.g. Low load, high speed and low
   temperature slide or journal bearings, sliding parts, rollers,
   bushes.

 

• Offshore: e.g. bogies, cable winches

 

• Vehicle construction: e.g. sliding parts, hoisting gear, rope
  pulleys

 

• Foods industry: e.g. sliding parts, conveyor stars, spiral
  conveyors

 

PLEASE NOTE THE FOLLOWING:

 

• For Oil Filled Nylon to be most effective, constant speed and

  pressure is required to activate the liquid lubricant. A fluid
  lubricant is advantageous in lowering the coefficient of friction
  and offers a reduction in the "stick - slip" effect however, in
  applications with minimal sliding movement and intermittent
  pressure; it is very difficult to maintain the lubricating film as
  viscosity drops with an increase in temperature. The
  lubricating film will therefore not be at the sliding faces. Under
  high loads the thickness of the lubricating film may be
  reduced as it is forced out from between the sliding surfaces.

 

© Gauteng Engeneering  Plastics 2020 – All Right Reserved